Specifications

Setup Menu Selection 5-79
01 Aug 2000
The value of the Bus 1 : Now parameter in the
Target ID Dialog is supplied by the library
firmware and can not be changed. The Bus 1 : Now
parameter indicates the SCSI ID address that is
currently in effect (0 .. 7) for bus port 1.
If
Y
is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Parity Dialog
When
Parity
is selected, the Parity Dialog is displayed. See
Figure 5-93. This option sets the SCSI bus parity behavior. Any
change will not take effect until library power is cycled.
Figure 5-93 Parity Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Parity : Next YES to enable SCSI parity
NO to disable SCSI parity
Retries : Next Set the number of retries
(000 .. 255) allowed when a
SCSI parity error is detected
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
The value of the Parity : Now parameter in the
Parity Dialog is supplied by the library firmware
Next Now
Parity Yes< Yes
Retries 001 001
Accept: N