Specifications

Commands Menu Selection 5-63
01 Aug 2000
Eject Clean Tape Dialog
When
Eject Clean Tape
is selected, the Eject Clean Tape
Dialog is displayed. See Figure 5-74. This option allows
removal of the cleaning cartridge(s) without opening the front
door(s) or without host intervention
Figure 5-74 Eject Clean Tape Dialog
Step 1 Press the button to select the current parameter
default value and move to the next parameter.
— or —
Press the button or the button to toggle the
Coordinate parameter values.
Parameters Values
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
module number which can be
modified if expansion modules
are present (1 .. 4)
The third field indicates the
storage cell section (1 .. 4),
drive bay (1 .. 2), or IE station
number
The fourth field indicates the
column of the section (A .. E),
drive port (A .. B) or IE station
column
The fifth field indicates the row
of the column. (01 .. 12 for half
inch and DLT coordinates)
(01 .. 18 for 8mm coordinates)
Enter SOURCE
Coord: S 01 1< A 13
OR Element: 00000
Accept: N