Specifications

Commands Menu Selection 5-49
01 Aug 2000
The fifth field indicates the row
of the column. (01 .. 12 for half
inch and DLT coordinates)
(01 .. 18 for 8mm coordinates)
Element Indicates the element number
which corresponds with the
coordinate parameter
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 4 Repeat Step 3 for all of the parameters in the list.
If
Y
is selected for the Accept parameter value, the
Response Screens appear. See Figure 5-56 and
Figure 5-57. Otherwise, the changed parameters
continue to display but no action is taken.
Figure 5-56 Response Screen
The accessor moves the cartridge between the selected
Source and Target elements.
Figure 5-57 Response Screen
If a Move Media is attempted without an inventory, the
following screen, refer to Figure 5-58 on page 5-50, is
displayed.
Requested command is
now in progress ...
Requested command is
now complete.