User`s manual

MDL-DataManager™ Reference Guide Architectural Energy Corporation
Section 4.0 MDL-Remote™ Application Page 27
! Check the "Use Modem for all Logger Actions" check box to enable the
software to use the modem.
! Set the number of "Dial Retries" to the maximum number of times you
wish the software to try to reconnect with the remote modem.
! Click OK to close this dialog.
! To communicate with the remote MDL, select either Configure MDL,
Retrieve Data, or Real Time Reading under the Logger menu
! To switch between loggers connected to a Smart Port, return to the
Options dialog under the Preferences menu.
! To hang up the modem after finishing MDL communications, select
"Hang Up Modem" under the Logger menu.
MDL-
DataManager
Options Window
Edit Phone
Numbers
The Comm Port/Modem tab in the MDL-DM Options dialog allows you to create new
phone numbers, edit existing phone numbers, or delete phone numbers that are no
longer required. Leaving a phone number in the list that is no longer required will not
cause problems, and if it is expected that the phone number may be required in the
future, then leave it in the list.
To edit or add phone numbers to the Phone Number line, click on the Edit button.
This brings up the Edit Phone Numbers dialog in which you can add, delete, or edit
phone numbers for data retrieval.
Command
Buttons
New
Creates a new line in the phone number list.
Delete
Deletes the selected phone number.
OK
Closes the "Edit Phone Numbers" dialog
Help
Displays this help.
Phone Number
Information
A space for configuration information associated with each phone number is also
provided. This can be useful when deploying the MDL-Remote equipment in multiple
locations or when redeploying equipment at a previous logging site.