User`s manual

MDL-DataManager™ Reference Guide Architectural Energy Corporation
Section 3.0 MDL-DataManager™ Software Page 19
saved, imported into other programs using the clipboard, and printed. Follow these
steps when Graph—–New Graph Definition is selected to create or edit a graph
definition.
1. Select the desired MicroDataLogger data file in the file list box. When you select
the file by clicking once on it, the data channels in the selected file will be listed in
the "Channels" list box.
2. To add channels to the plot list, either select them individually by clicking once on
each channel and add the selected channels to the plot list by clicking "Add", or all
of the channels to the plot list by clicking "Add All".
You can add unlimited additional data channels from other data files to the plot list
using this technique, although only four data channels can be displayed at once.
The data channels will be added to the drop-down channel lists in the Graph view.
3. To change the order of the data channels in the plot list, select individual channels
and use the Up and Down buttons to change the order.
4. To remove data channels from the plot list, select individual channels and click the
Remove button, or to remove all data channels from the list, use the Remove All
button.
5. When the Plot List is finalized, click OK to close the window and display the Graph
Window.