User`s guide

20
In the lower right of the window, the following functions are displayed for setting.
The type of graphic chart is chosen in Type. Select either Bar Graph or Line Graph.
The Show 'Total' with 'Bar' graph option becomes enabled when [ng/10 ml] is chosen for the unit and
Line Graph for Type.
Only the total amount is displayed in the bar graph when checking this option.
Checking ‘Chart all records’ displays the gas concentration value of all measurement data in the form of a
graphic chart.
If you clear ‘Chart all records’, ten measurement data are displayed at once. If you have more than ten
data, the next data will be displayed by moving the scroll bar at the bottom of the table.
If you click a part of the table, an indicator is displayed in the graphic chart that corresponds to the data
clicked.
Checking/unchecking ‘Show the scale of the X-axis’ turns on/off the display of scales on an X-axis.
The alterations to the settings are saved in the program and a graph based on the same setting is displayed
when you next open the [Records] window.
It is enabled when ng/10 ml is chosen
for the unit and Line Graph for type.