User`s guide

14
Saving Measurement Data
When the measurement data is received, a dialog box is displayed to ask if you want to save the data. To
save it, click OK button.
If you click Cancel button, the data is not saved. However, you will have a chance to save it later by clicking
Save button.
If you close the [Measure] window by clicking Close button or if you reset the graphic display by clicking
Start button, the received data is lost and cannot be saved.
For your reference:
If you notice that you have chosen wrong test subject after data reception is started, click Cancel button in
the dialog box shown above. (Click Cancel button, when the confirmation for measurement results is
displayed.)
Click Save button on the [Measure] window. Now you are ready to specify the right test subject.
Select the right test subject and save it.
Displaying Judgment
Following the dialog box that asks if you want to save the data when the measurement is completed,
another dialog box is displayed to choose display of the [Judgment] window. Click OK button. The
[Judgment] window is displayed.
The [Judgment] window can also be displayed if you click Judgment button after completing measurement.
For details of the [Judgment] window, refer to the “Judgment” section on page 14.
Suspending Measurement
Click Stop button if you want to suspend the measurement before completing data reception. Clicking Yes
button in the [Stop Receiving] window suspends data reception and clears the graphic chart.
Note
Even if receiving data is suspended on the OralChroma DataManager side, OralChroma continues sending
measurement data. Click Start button after measurement is completed on the OralChroma side, if you want
to restart data reception.
N
N
o
o
t
t
e
e
When measurement data were not received completely for the mistake of the operation order, an error of
the communication setting or the malfunction of the communications cable normally, you can store gas
density displayed by 'OralChroma' as a measurement record. Please refer to "Appendix - Input of the
measurement result" in detail.