User`s guide

9
Setting Communication Port Number
When you first activate the program after installation, a dialog box is displayed to trigger the setting of the
communication port number. Specify the communication port number you connect OralChroma to.
Setting Device ID
When you use multiple OralChroma’s, ID numbers have to be registered to identify them.
It is possible to make measurements using OralChroma without a device ID. Registration, however, is
highly recommended, even if you use only one OralChroma.
The device ID number is registered on the [System Setting] window.
For the specific procedure, refer to “[Device ID] tab” section on page 26.
Ending the OralChroma DataManager
(1) End all operations including “Measure” and “View records” and return to the [OralChroma
DataManager] window.
(2) Click Exit button on the [OralChroma DataManager] window.
If you have once cancelled
the box, click Measure
button and the dialog box will
be displayed again.
Select one from a set of choices
and click Apply button.