Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 3
Front and Rear Panels
The front panel provides the means to locally configure the MX1. The rear panel
provides the electrical and communications interfaces.
Front Panel
The front panel contains a two-line LCD window and six control buttons, which are
used to configure the MX1.
Figure 3: MX1Front Panel
The LCD window displays two lines of a selected window. The ▲ and ▼ buttons are
used to scroll through the window. The ▲, ▼, ►, and ◄ buttons are used to select
menu entries viewed through the LCD window. The ENTER button is used to save new
configurations during an edit session, while the ESC button is used to discard new
configurations.
The front panel provides two ports for the Conditional Access Modules (CAM), CAM 1
and CAM 2.
The Status LED provides status information for the MX1, as described in Table 1.
Table 1: Status LED Indications
Appearance Significance
Dark Power off
Blinking Green Power up self test
Green Operational state
Orange Alarm
Red Error