Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual iii
About this Manual
This manual contains instructions on the minimum hardware configuration of the MX1.
Where applicable, the additional options for the maximum configuration are indicated.
This manual describes the operation of the MX1 through the LCD screen.
Organization of this Manual

Introduction. This chapter describes the hardware interfaces of the MX1 and the
front and rear panels. It also includes a description of and instructions for working
with the menu system.
 Configuring the Input TS. This chapter contains instructions for configuring the
input TS parameters included in the Input Menu.

Configuring the Decoder Parameters. This chapter contains instructions for
configuring the decoder parameters included in the Decoder Menu.
 Configuring the Output TS. This chapter contains instructions for configuring the
output TS parameters included in the Output Menu.
 Configuring the CA System. This chapter contains instructions for configuring the
Conditional Access system parameters included in the CA System Menu.
 Viewing the MX1 Status. This chapter contains instructions for viewing the status of
the MX1 through the Status Menu.

Viewing the Unit Configuration. This chapter contains instructions for viewing the
current configuration of the MX1 through the Unit Config Menu.

Viewing and Configuring the Communication Settings. This chapter contains
instructions for viewing and configuring the settings of the various communication
ports through the Comm Settings Menu.

Configuring Additional Setups. This chapter contains instructions for configuring
additional parameters such as input bit rate and high jitter.
 Glossary. The glossary lists and explains the terms and acronyms used throughout
this manual.
Conventions Used in this Manual
 Indicates a note.