Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 39
9
Configuring Additional Setups
The Additional Setups Menu allows you to configure the DVB input bit rate and high
jitter.
To access the Additional Setups Menu, select Additional Setups from the Main Menu.
Figure 90 illustrates the Additional Setups Menu screen.
Figur
e
90: Additional Setups Menu Screen
Configuring the DVB Input Bit Rate
To configure the DVB input bit rate:
1. From the Main Menu, select Additional Setups. The Additional Setups Menu screen
appears (Figure 90).
2. Select Input Bit Rate and press
►
to move the cursor to the right side of the LCD
screen.
3. Press
▼
and
▲
to change the parameter value. The following are possible values:

54
 108
4. Press ENTER to save your changes.
Press ESC to discard your changes.
Enabling or Disabling High Jitter
To enable or disable high jitter:
1. From the Main Menu, select Additional Setups. The Additional Setups Menu screen
appears (Figure 90).
2. Select High Jitter and press ► to move the cursor to the right side of the LCD
screen.