Specifications

38 MX1 Single Channel MPEG 2 Decoder Operation Manual
Baud Rate { 115200}
Parity { None}
Data Bits { 8}
Stop Bits { 1}
Flow Control {Xon/Xoff}
Figure 86: Full Serial Menu Screen
For a description of the Serial Menu parameters, see Table 2.
2. Press ESC to return to the Main Menu.
Configuring the Network Settings
To configure the network settings:
1. From the Main Menu, select Comm Settings > Network. The Network Menu
screen appears.
Figure 88: Network Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 89 illustrates the full
Network Menu.
IP <192.009.200.096>
Mask <255.255.255.000>
Gate <192.009.200.254>
PHY > AUTO
Figure 89: Full Network Menu
2. To edit the network parameters:

Select the parameter you wish to change and press
►
to move the cursor to the
right side of the LCD screen.
 Press
▼
and
▲
to change the parameter value.
3. To configure additional parameters, press ◄ and repeat step 2.
4. To save your changes, press ENTER. The Comm Settings Menu appears.
5. Press ESC to return to the Main Menu.