Specifications

34 MX1 Single Channel MPEG 2 Decoder Operation Manual
Parameter Type Possible Values
BER
Bit Error Rate
Note: If the MX1 displays a value of X.XXXX e-3 or
higher (e.g., 2.0000 e-2) check your satellite
connection.
Gain Marg
Gain Margin in Eb/N0.
Note: A value less than 7 dB indicates a critical
state.
Rcv Level -25 to -65 dbm (dynamic range of the receiver)
2. Press ESC to return to the Main Menu.
Viewing the ASI 1 or ASI 2 Inputs
To view the ASI 1 or ASI 2 inputs:
1. From the Main Menu, select Status > Inputs > ASI 1 or ASI 2. The Status ASI
Menu screen appears.
Figure 79: Status ASI Menu Screen
Table 18 lists the parameters and their permitted values.
Table 18: ASI Menu Parameter Values
Parameter Possible Values
SYNC
On. The ASI source is connected and working.
Off. The ASI source is unavailable.
Packet Length
188, 204.
The packet length value is determined automatically by
the system.
2. Press ESC to return to the Main Menu.