Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 29
Configuring the MCD
The MCD Menu allows you to add and remove the decrypted services of each CAM.
Figure 64 illustrates the MCD Menu screen.
 The MCD feature is only available to users of the MX1 3000 series.
Figure 64: MCD Menu Screen
Enabling or Disabling MCD
To enable or disable MCD:
1. From the Main Menu, select CA System > MCD. The MCD Menu screen appears
(Figure 64).
2. Press
►
to move the cursor to the right side of the LCD screen.
3. Press ▼ and ▲ to select a new parameter value. The following are possible values:

MCD OFF. Select this value to disable MCD mode.
 MCD ON. Select this value to enable MCD mode.
 Press ◄ to return to the left side of the LCD screen.
4. Press ENTER to save your changes and return to the CA System Menu.
Press ESC to discard your changes and return to the CA System Menu.
Configuring MCD Slot 1
To configure MCD Slot 1:
1. From the Main Menu, select CA System > MCD > Slot 1. The MCD Slot Menu
screen appears.
Figure 66: MCD Slot Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 67 illustrates the full
MCD Slot Menu.