Specifications

24 MX1 Single Channel MPEG 2 Decoder Operation Manual

ASI 1
 ASK 2
 CAM 1

CAM 2

If CAM 1 or CAM 2 is selected, the TS_OUT_2 Submenu is displayed to enable
selection of an input stream for decryption. For instructions on configuring the
TS_OUT_2 CAM parameters, see Configuring the TS_OUT_2 CAM Parameters on page
24.
4. Press ENTER to save your changes and return to the left side of the menu.
Press ESC or ◄ to discard your changes and return to the left side of the menu.
5. Press ENTER to save your changes. The Decoder Submenu appears.
Press ESC to discard your changes. The Decoder Submenu appears.
Configuring the TS_OUT_2 CAM Parameters
The TS_OUT_2 CAM parameters need to be configured if you select CAM 1 or CAM 2
as the input to Output 2.
To configure the TS_OUT_2 CAM parameters:
1. Navigate to the TS_OUT_2 Submenu. For instructions, see Configuring the Output
TS_OUT_2 on page 23. The TS_OUT_2 Submenu screen appears.
Figure 51: TS_OUT_2 Submenu Screen
To view the rest of the submenu, use the scroll buttons. Figure 52 illustrates the
full TS_OUT_2 Submenu.
Service <1BBDH>
Video PID <00A0H>
Audio PID <0052H>
Teletext PID <2000H>
Figure 52: Full TS_OUT_2 Submenu

The value 2000H indicates that no PID exists for Teletext.
2. To edit the parameters:
 Press ► to enter the right side of the menu.

Press
▼
and
▲
buttons to edit the PID.