Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 23
4
Configuring the Output TS
The Output Menu allows you to choose the decoder output. In order to send TSs to
external devices, you must first configure the two output TSs. The first output TS
receives the same TS as the decoder input TS and is therefore read-only in the
Output Menu. The second output TS can use a different input TS.
To access the Output Menu, select Output from the Main Menu. Figure 47 illustrates
the Output Menu screen.
Figur
e
47: Output Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 49 illustrates the full
Output Menu.
TS_OUT_1 {QPSK 1 -> CAM 1}
TS_OUT_2 <QPSK2>
IP OUT <QPSK1>
LSData (RS-232) {None}
Figure 49: Full Output Menu
Configuring the Output TS_OUT_2
To configure the output TS_OUT_2:
1. From the Main Menu, select Output. The Output Menu screen appears (Figure 47).
2. Scroll down to TS_OUT_2 and press
►
to move the cursor to the right side of the
LCD screen.
3. Press
▼
and
▲
to toggle the parameter setting. The following is a list of possible
values:
 QPSK1

QPSK2