Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 21
Table 11: Audio Menu Parameter Values
Parameter Possible Values
Mute ON, OFF
Audio Level -26 dB to 6 dB
STC Offset 0 – 90 msec (multiples of ten)
Sample Rate
Any value complying with MPEG2 ISO/IEC standards
Note: This value is read-only.
Bit Rate
Any value, in Kb
Note: This value is read-only.
Coding Mode
Stereo, mono, Dolby Surround, mono mix
Note: This value is read-only.
Content MPEG 1, MPEG 2, AC3 (for Dolby surround), MP3, Undefined
Digital
Out(optional)
PCM / Pass Through
Clipping No Clip, 24, 22, 20, 18, …, 2 dB
3. Press ENTER to save your changes and return to the left side of the menu.
Press ESC or
◄
to discard your change and return to the left side of the menu.
4. To configure additional parameters, repeat steps 2 - 0.
5. Press ► or ENTER to save changes and return to the Decoder Submenu.
Press ESC to discard your changes and return to the Decoder Submenu.