Specifications

20 MX1 Single Channel MPEG 2 Decoder Operation Manual
Parameter Possible Values
VITS ON, OFF
3. Press ENTER to save your changes and return to the left side of the menu.
Press ESC or
◄
to discard your changes and return to the left side of the menu.
4. To configure additional parameters, repeat steps 2 - 3.
5. Press ENTER to save changes and return to the Decoder Submenu.
Press ESC to discard your changes and return to the Decoder Submenu.
Configuring the Decoder Audio
The Audio menu allows you to configure the audio stream for the decoder.
To configure the Decoder audio:
1. From the Main Menu, select Decoder > [Decoder Name] > Audio. The Audio
Menu screen appears.
Figure 44: Audio Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 45 illustrates the full
Audio Menu.
Mute <OFF>
Audio Level <6 dB>
STC Offset <0 msec>
Sample Rate {50338.7 }
Bit Rate {16 Kb }
Coding Mode {Stereo }
Content {MPEG1 }
Digital Out(optional) <PCM>
Clipping {No Clip }
Figure 45: Full Audio Menu
2. To edit the parameters:
 Scroll to the desired parameter.
 Press
►
to move the cursor to the right side of the menu.

Press
▼
and
▲
to toggle the parameter setting.
Table 11 lists the parameters and their permitted values.