Specifications

16 MX1 Single Channel MPEG 2 Decoder Operation Manual
Configuring the Decoder PIDs Mode
The PIDs Menu allows you to manually assign Program Identification strings to the
elementary streams within a TS.
To configure the PIDs Mode:
1. From the Main Menu, select Decoder > [Decoder Name] > Work Mode > PIDs
Mode. The PIDs Mode Menu screen appears.
Figure 34: PIDs Mode Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 28 illustrates the full
PIDs Mode Menu.
PCR <0245H>
Video <0245H>
Audio <0267H>
Audio Type <AC3 >
Teletext <0000H>
Subtitles <0068H>
Service <0067H>
Figure 35: Full PIDs Mode
2. To edit the parameter:

Scroll down or up to select the desired input.
 Press ► to enter the value field.
 Press the arrow buttons to edit the value.
3. To edit additional parameters, press ◄ until the cursor is in the left part of the
screen and repeat steps 2 to 3 until you are finished.
4. Press ENTER to save your changes. The Work Mode Menu appears.
Press ESC to discard your changes. The Work Mode Menu appears.
5. Press ESC to return to the Decoder Submenu.
Configuring the Decoder Video Parameters
The Decoder Video Menu allows you to configure the video stream output within a TS.
To configure the video output:
1. From the Main Menu, select Decoder > [Decoder Name] > Video. The Video
Menu screen appears.