Specifications

14 MX1 Single Channel MPEG 2 Decoder Operation Manual
Configuring the Decoder Input
The Decoder Input Menu shows the status of the input TSs and allows you to configure
the input TS for the decoder.
To configure the parameters for the Decoder Input TS:
1. From the Main Menu, select Decoder > [Decoder Name] > Input. The Decoder
Input Menu screen appears.
Figure 27: Decoder Input Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 28 illustrates the full
Decoder Input Menu.
QPSK1 { SYNC ON }
QPSK2 { SYNC ON }
ASI 1 { SYNC ON }
ASI 2 { SYNC ON }
IP { SYNC ON }
CAM1 { ASI 1 }
CAM2 { QPSK1 }
Figure 28: Full Decoder Input Menu
2. Scroll to the parameter you wish to configure and press ► to move the cursor to the
right column.
3. To edit the parameter:

Press
►
to move right one number or letter.
 Press ◄ to move left one number or letter.
 Press
▲
to select other values or increase a number. This depends on the
parameter.
 Press ▼ to select other values or decrease a number. This depends on the
parameter.
4. To configure additional parameters, press ◄ and repeat steps 2 - 3.
5. To save your changes, press ENTER. The LCD displays the first two lines of the
Main Menu.
To discard your changes, press ESC. The LCD displays the first two lines of the Main
Menu.
Configuring the Decoder Work Mode
The Decoder Work Mode Menu allows you to define the service in a TS. The following is
a list of possible work modes: