Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 11
Parameter Type Lower Limit Upper Limit
Universal LNB 10.600 GHz High Band
9.7500 GHz Low Band
CBand 5.150 GHz 5.150 GHz
Sym (Symbol) Rate 1 MBaud 45 MBaud
FEC 1/2, 2/3, 3/4, 5/6, 7/8, or Auto
Polarity Horizontal, Vertical, None
22 KHz ON, OFF
4. To configure additional parameters, press
◄
and repeat steps 2 - 3.
5. To save your changes, press ENTER. The LCD displays the first two lines of the
Main Menu.
To discard your changes, press ESC. The LCD displays the first two lines of the Main
Menu.
Configuring the IP Input TS
To configure parameters for IP TS input stream:
1. Select Input > IP.
2. Define the PORT NUMBER.
PORT NUMBER <11111>
IP TYPE <MULTICAST>
3. Choose the IP Type: UNICAST or MULTICAST.
4. In case MULTICAST chosen you should change the MULTI IP according to
source stream unit IP.
UNI <10.10.10.10>
MULTI <225.20.20.20>
10.10.10.10 IS THE CURRENT UNIT IP ADDRESS.
225.20.20.20 IS THE SOURCE STREAM UNIT IP ADDRESS.
To edit the parameter:
 Press ► to move right one number or letter.
 Press
◄
to move left one number or letter.
 Press ▲ to select other values or increase a number. This depends on the
parameter.