Specifications

MX1 Single Channel MPEG 2 Decoder Operation Manual 7
The LCD window shows only two consecutive lines of a selected menu. A blinking
rectangle
█
indicates the position in the cursor.
The Main Menu and lower submenus contain options you can select using the buttons.
Menus at the bottom of the hierarchy contain information that you can edit by using
the arrow buttons. Data is displayed in some of the menus. Brackets in a menu
indicate whether the data can be modified. The following types of brackets are used:
 { } – data cannot be modified
 < > – data can be modified
Getting Started
After the MX1 powers up, the first two lines of the Main Menu appear. Figure 10
illustrates the Main Menu screen.
Figure 10: Main Menu Screen
To view the rest of the menu, use the scroll buttons. Figure 12 illustrates the full Main
Menu.
Input
Decoder
Output
CA System
Status
Unit Config
Comm Settings
Additional Setups
Figure 12: Full Main Menu
Table 3 lists the references in this manual for instructions on configuring the Main
Menu options.
Table 3: Reference Table for Main Menu Option Configuration
Main Menu Option Refer To
Input Configuring the Input TS on page 9
Decoder Configuring the Decoder Parameters on page 13
Output Configuring the Output TS on page 23