Specifications

6 MX1 Single Channel MPEG 2 Decoder Operation Manual
The Menu System
This section describes the MX1 menu.
The menu is organized hierarchically as illustrated in Figure 8.
 Each rectangle represents a menu.
Figure 8: Menu System
Controlling the Menu
The MX1 is configured through the front panel buttons. The following six buttons are
used to navigate the menu system and configure available parameters:
 ▼ scrolls downward through a menu. In edit mode, it is used to edit values.
 ▲
scrolls upward through a menu. In edit mode, it is used to edit values.
 ► enters submenus or edit mode. In edit mode, it moves the cursor to the right
column.
 ◄
moves the cursor one position to the left in edit mode.
 ENTER enters into a submenu. If there is no submenu, pressing ENTER saves your
changes, exits the current menu, and enters the next higher menu.
 ESC exits from a menu without saving information. In submenus, pressing ESC
enters a higher menu.