Install Instructions

MagnaClean
®
Professional2XP has been developed by the industry leading and
multi-award winning company that pioneered magnetic filtration. ADEY’s filters protect
over three million heating systems throughout Europe removing virtually 100% of the
damaging suspended black iron oxide sludge that builds up in all hydronic heating systems.
The x-treme performance dual-action filter can be installed anywhere on
the main circuit. However, to achieve the best level of protection for the
boiler or baseboard, it is recommended that MagnaClean Professional2XP
is installed after the last radiator and before the boiler.
Installation
The following instructions are designed to
support engineers in the safe and effective
installation and servicing of MagnaClean
Professional2XP and should be followed at all
times.
Any queries should be directed to ADEY on
844 378 0442
Open vented system Tankless/ Sealed system
In both diagrams, position A is best
practice, while B is suitable.
Note: We firmly recommend MagnaClean
Professional2XP is installed and serviced
by a qualified heating engineer.
Your system is protected by
Annual service required
adeyusa.com
Servicing
2
Open
drain
Close
drain
Open vent
Close vent
Take care not to
over tighten
4
Avoid
over-
tightening
7 6
Open
vent
Turn
valves
OFF
1 3
Clean
Clean
5
Clean
Remove cover
Turn
valves
ON
Open
vent
8
2
3
4
6
7
5
1” iron1 1” copper1
ORR
7 3�₈”
7 3�₈”
Turn
valves
ON
Close
vent
Close
vent
Close
vent
Open
vent
Add
MC1+
Protector
Add
MC1+
Protector
Attach valve clips
1
1
1
1
1
2
2
2
2
2
3
3
4
3
3
3