User guide

A
RF45
User Guide
Ref. 09-08-V0-smn p 15
• Port number
The port number setting is used in TCP connection. It is the channel for
connection initiated by a remote client.
Packets sent to the modem with this port number are received on this
channel.
The port number setting is used as source port number for outgoing packets.
The current value is displayed in brackets.
Port No (10001) ?
The following TCP ports are reserved and must not be used:
1-1024, 9999, 14000-14009, 30704 and 30718.
• Connect mode
Connect mode defines the modem connection method and its reaction to
incoming and outgoing connections over the network. The current value is
displayed in brackets.
ConnectMode (C1) ?
Enter connect mode options in hexadecimal notation:
The following table displays available options:
connect mode option 7 6 5 4 3 2 1 0
Never accept incoming 0 0 0 0
Always accept 1 1 0 0
Connect on a remote
server on RS232
character reception
0 0 0 0 1
+++ sequence in modem mode
Disable or enable the WiPort’s ability to send the escape sequence. The
default is Y (Yes) (send the escape sequence).
Send '+++' in Modem Mode (Y) ?