User guide

A
RF45
User Guide
Ref. 09-08-V0-smn p 14
The current value is displayed in brackets. This value does not apply for the
setup mode which can only be entered at 9600 bps.
Baudrate (9600) ?
• I/F (interface) mode
The interface (I/F) mode is a bit-coded byte entered in hexadecimal notation.
The current value is displayed in brackets. In the example below 4C means :
8 bits, no parity, 1 stop.
I/F Mode (4C) ?
The following table displays available options :
I/F mode option 7 6 5 4 3 2 1 0
RS232 0 0
7 bits 1 0
8 bits 1 1
No parity 0 0
Even parity 1 1
Odd parity 0 1
1 stop bit 0 1
2 stop bits 1 1
• Flow
Flow control sets the local handshaking method for stopping serial
input/output. The current value is displayed in brackets.
Flow (00) ?
The following table displays available options:
Flow control option Hex
No flow control 00
XON/XOFF flow control 01
Hardware handshake with RTS/CTS lines 02