User guide

A
RF45
User Guide
Ref. 09-08-V0-smn p 13
• Change telnet configuration password
Setting the telnet configuration password prevents unauthorized access to
the setup menu via a telnet connection to port 9999. Type Y and enter the
password. The password must have 4 characters.
Change telnet config password (N) ? Y
Enter new Password:
• DHCP name
There are three methods for assigning DHCP names to the modem.
Default DHCP name : if the DHCP name is not changed and the IP is
0.0.0.0, then the DHCP name defaults to Cxxxxxxxx where xxxxxxxx are the
8 last bytes of the MAC address of the modem coded in ASCII format.
Custom DHCP name : create your own DHCP name. If using an IP address
of 0.0.0.0 then the last option in server configuration menu is Change DHCP
device name. This option allows you to change the DHCP name to an
alphanumeric name (MY_DHCP in the example).
Change DHCP device name (not set) ? (N) ? Y
Enter new DHCP device Name : MY_DHCP
Numeric DHCP name : you can change the DHCP name by specifying the
last byte of the IP address. When you use this method, the DHCP name is
MY_DHCPYY where YY is what you choose for the last byte of the IP address.
This method only works with two digits numbers (0 to 99).
Channel 1 menu
• Baudrate
The unit attached to the modem must agree with a baudrate to use for the
serial connection. Valid baudrate values are 300, 600, 1200, 2400, 4800,
9600 (default), 19200, 38400, 57600, 115200, 230400, 460800 or 921600.