User guide

A
RF45
User Guide
Ref. 09-08-V0-smn p 12
The default value is N (No), indicating the gateway address has not been set.
To set the gateway address, type Y. At the prompt, enter the gateway
address.
Set Gateway IP Address (N) ? Y
Gateway IP addr (000) .(000) .(000) .(000)
• Set the netmask
The net mask defines the number of bits taken from the IP address that are
assigned for the host part. The net mask is entered under IP address format
(decimal values).
Netmask: Number of Bits for Host Part (0=default) (8)
The unit prompts for the number of host bits to be entered, then calculates
the netmask, which displays in standard decimal dot notation when the save
parameters are displayed (for example 255.255.255.0).
Standard IP network netmasks representing host bits
Network class Host bits Netmask
A 24 255.0.0.0
B 16 255.255.0.0
C 8 255.255.255.0
• Set the DNS server address
The DNS server allows the name of a remote machine to be resolved
automatically. The default is N (No), indicating the DNS server address has
not been set. To set the DNS server address, type Y. At the prompt, enter
the DNS server address. If the device is DHCP enabled, the DHCP server
provides the DNS server IP address, which will override this configured value.
Set DNS Server IP addr (Y) ?
DNS Server IP addr (000) 192.(000) 168.(000) 0.(000) 100