User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 7
The following topology is also possible using Wi-Fi Ad-hoc mode:
- The ARF45-PRO contains a full-featured TCP/IP stack and supports
the following communication and management protocols:
ARP, IP, TCP, UDP, ICMP, BOOTP, DHCP AutoIP, Telnet, FTP,
TFTP, HTTP(S), SSH, SSL/TLS, SNMP, DNS, PPP , as well as the
complete suite of 802.1X Enterprise Authentication Protocols (EAP)
including EAP-TLS, EAP-TTLS, PEAP and LEAP.
- The configuration of the ARF45-PRO (that is the Serial link,
Network, WLAN/Ethernet interfaces, Security mode…parameters)
can be achieved in 2 ways:
1) Through a terminal software using a PC serial port.
2) Over the network, through a browser-based interface (which is
accessing the embedded web server) or a Telnet connection.