User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 59
- In the console tree of the Internet Authentication Service snap-in,
right-click RADIUS Clients, and then click New RADIUS Client.
- On the Name and Address page of the New RADIUS Client wizard,
in Friendly name, type WirelessAP. In Client address (IP or DNS),
type the IP address of the AP on the network, and then click Next.
This is shown in the following figure.
Figure 35
- Click Next. On the Additional Information page of the New RADIUS
Client wizard, for Shared secret, type a RADIUS shared secret for
the wireless AP, and then type it again in Confirm shared secret.
This is shown in the following figure. The shared secret entered
here needs to match the RADIUS shared secret on the
configuration of the wireless AP.