User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 49
For example, a Telnet server commonly uses port number 23.
The following is a list of the default (and thus reserved) server port numbers
running on the ARF45-PRO:
- TCP Port 22: SSH Server (Command Mode configuration)
- TCP Port 23: Telnet Server (Command Mode configuration)
- TCP Port 80: HTTP (Web Manager configuration)
- TCP Port 443: HTTPS (Web Manager configuration)
- UDP Port 161: SNMP
- TCP Port 21: FTP
- UDP Port 69: TFTP
- UDP Port 30718: Query port
- TCP/UDP Port 10001: Tunnel 1
Modem emulation mode
The ARF45-PRO supports Modem Emulation mode for devices that send out
modem signals. There are two different modes supported:
Command Mode
: sends back verbal response codes.
Data Mode
: information transferred in is also transferred out.
Command mode
The Modem Emulation’s Command Mode supports the standard AT command
set. For a list of available commands from the serial or Telnet login, enter
AT?