User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 45
Connect Mode has five states:
- Disabled (no connection)
- Enabled (always makes a connection)
- Active if it sees any character from the serial port
- Active if it sees a specific (configurable) character from the serial
port.
- Modem emulation
Accept mode
In this mode, the ARF45-PRO listens for a connection. In other words, the
ARF45-PRO behaves like an IP server. A node on the network initiates the
connection.
Note
: Accept Mode is enabled by default!
In Accept Mode, the ARF45-PRO waits for a connection. The configurable
local port is the port the remote device connects to for this connection. There
is no remote port or address. The default local port is 10001.