User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 31
To dump the current configuration, use the following command:
xcr dump <
param >
By default
param is empty and the whole configuration is dumped and
displayed on the terminal window.
The user may choose to export only part of the configuration by setting
param to the group’s names that have to be exported:
Example:
xcr dump
interface:2,arp,ppp will export and display the content of the arp
group, the content of the
ppp group and and the content oif the instance 2 of
the
interface group.
Duplicating configuration through an FTP connection
An XML configuration file can be exported or imported to or from the PC’s
filesystem by setting up a connection to the FTP server of the ARF45-PRO.
By default the FTP server is running and the default username/pwd is:
admin/none.
Export
: type the command: get matchport_bg_pro.xcr onto the FTP client
window. As a result, the current configuration of the ARF45-PRO is exported
onto a file named
matchport_bg_pro.xcr created in the FTP directory, which
is the directory from which you ftp’ed.
Import
: type the command: put matchport_bg_pro.xcr onto the FTP client
window. As a result, the content of the
matchport_bg_pro.xcr configuration
file (that should be located in the FTP directory, which is the directory from
which you ftp’ed) is loaded in the ARF45-PRO.
For this to take effect, the ARF45-PRO must be rebooted!
Duplicating configuration with Adeunis-RF configuration application
Using the Adeunis-RF application enables the user to export and import
configuration over the serial port.