User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 26
Note
: Typing exit at the login level or the enable level will close the CLI
session.
To view the current configuration at any level: Type show. The configuration
for that level displays.
To view the list of commands available at the current level: At the command
prompt, type the question mark “?”. The list of current commands displays.
(There is no need to press Enter.)
Note
: Items within < > (e.g. <string>) are required parameters.
To view the available commands and their explanations: At the command
prompt, type * and press Enter. The list of commands for that level and their
description displays.
To view the list of commands available for a partial command: At the
command prompt, type the partial command followed by the question mark
“?”. The list of current commands displays. (There is no need to press Enter.)
For example: <tunnel-1>#accept? displays a list of all accept commands at
the tunnel level.
To view the available commands and their explanations for a partial
command: At the command prompt, type the partial command followed by *
and press Enter. The list of partial commands and descriptions displays.
For example: <tunnel-1>#accept* displays a list of all accept commands and
descriptions at the tunnel level.