User guide

A
RF45-PRO
User Guide
Ref. 11-06-V0-ffr
p 8
Power supply
To perform wiring of these products, the bottom part of the housing (part
with stuffing box) has to be opened by unscrewing the two stainless steel
screws on each side.
Retirer les vis de la partie
avec presse étoupe
Remove these screws
The ARF45PRO product must be supplied from a DC voltage source. This
voltage source must be 8V minimum and must not exceed 36 V
DC
.
+ DC Supply
WLAN
ACT
- CT
S
+ RTS RX TX