User's Manual

SIGFOX US demonstrator – User guide v1.1
page : 13 / 16
3.2.2 Specific configuration functions
REMINDER: in order to read the content of a register, the user needs to type the name of said register followed by “?”
Example: ATS282? gives back the content of register S282.
Command
description
ATS282=x
AT&W (save new parameter)
x=1 : product in uplink/downlink mode (bidir)
x=0 : product in uplink mode (monodir)
ATS271=x
AT&W (save new parameter)
x≠0: maximum duration of the GPS init phase, in minutes
(default 8, max. 8)
x=0: deactivates the GPS.
Modification of this register needs a product reboot in order
to be validated
3.2.3 Serial link parameters
Parameter
Value
Speed
115200 bps
Parity
Even
Bits
8
Stop bit
1