User's Manual

Vokkero Evolution 3
9
«US tables» :canbeusedinNorthAmerica(USA/Canada)andmostoftheCentraland
SouthAmericancountries.
«T0 tables»:canbeusedinAustraliaandsomeAsiancountries.
«NZ tables»:canbeusedinNewZealandandsomeAsiancountries.
TABLE ID FREQUENCIES
US1 25channelswithinthe902MHzto918MHzband
US2 25channelswithinthe912MHzto928MHzband
US3 25channelswithinthe902MHzto928MHzband
US4 25channelswithinthe902MHzto928MHzband
US5 25channelswithinthe902MHzto928MHzband
T01 20channelswithinthe915MHzto928MHzband
T02 20channelswithinthe915MHzto928MHzband
T03 20channelswithinthe915MHzto928MHzband
T04 25channelswithinthe915MHzto928MHzband
NZ1 4channelswithinthe921.5MHzto924.5MHzband
NZ2 4channelswithinthe924.5MHzto927.75MHzband
NZ3 8channelswithinthe921.5MHzto928MHzband
NZ4 10channelswithinthe921.5MHzto928MHzband
Procedure:
• Onthehomescreen,pressthe“Menu”keyuntiltheUser MENUisdisplayed.
• Usingthe“+”or“-”keys,accesstheChannelsub-menu.Press“OK”tovalidateyour
choice.
• IntheChannelmenu,selectthechannel(US1toUS5forUSA/Canadaversion,T01to
T04forAustraliaversionandNZ1toNZ4forNewZealandversion)byusing“+”or“-”.
Youmustassignthesamechannelnumbertoalltheterminals.
• Press“OK”tovalidateyourchoice.
• Press“Menu”toreturntothehomescreen.
d. Settingthesystemsinconferencemode(encryptionprocedure)
Principle:Inordertocommunicate,thedevicesmustsaveanencryptionkeysuppliedby
apparatusnumber01.
Thisoperationisrequiredinorderto:
• Enableallthedevicestotakepartinaconference.
• Addadevicetoanexistingsystemthathasalreadybeencongured.
IMPORTANT
Adevicecannotcommunicatewithasystemiftheencryptionprocedurehasnotbeencar-
riedout.Ifyouwanttoaddaterminaltoanexistingsystem,youabsolutelymustcarryout
thisprocedurewithallthedevicesinthesystem(includingthedevicesconguredinListener
mode).
Makesurethateachofthefollowingcriteriaarefullledbeforestartingtheoperation:
• Allthedevicesmustusethesamechannel.
• OnlyonedevicebearstheID01.


Procedure:
• Oneachdevice,pressthe“Menu”keyuntiltheUser MENUisdisplayed.
• Usingthe“+”or“-”keys,accesstheNetworksub-menu.Press“OK”tovalidateyour
choice.