System information

USB board
Description Spare part number
USB board for use with HP Pavlion 17 Notebook PC computer models 767120-001
USB board for use with HP Pavlion 15 Notebook PC computer models 762497-001
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 65).
5. Remove the optical drive.
6. Remove the base enclosure and top cover (see
Base enclosure on page 70).
Remove the USB board and cables:
1. Disconnect the USB cable from the ZIF connector (1).
2. Remove the Phillips screw securing the USB board (2), and lift the USB board (3) to remove it.
Reverse this procedure to install the USB board and cables.
Component replacement procedures 93