ADEPTS ASSEMBLY INSTRUCTIONS Six Drawer Wide Roil Cart #76152 Medium Pine Finish #76168 Matte Black Finish #76181 White Finish CUSTOMER SERVICE AND REPLACEMENT PARTS: FOR FASTER SERVICE ON PARTS OR HELD, PLEASE GO TO OUR WEBSITE AT WWW.ADEPTUS.COM; OR CALL TOLL FREE 1.888 ADEPTS (1.888.233.7887) FOR ASSEMBLY QUESTIONS. MON-FRI P.M. E8.T., CLOSED HOLIDAYS IF YOU CALL, PLEASE HAVE ON HAND: ° PRODUCT NAME AND STOCK NUMBER » WHEN AND WHERE THE UNIT WAS PURCHASED e P.O.
Many People, One Thought PROVIDING REALITY SLIP WOOD FUTURE AT AN AFFORDABLE PRICE HAS BEEN A GROUP EFFORT. FROM CONCEPT TO PRODUCT LESION, MANUFACTURING AND RETAILING, BACH ARENA FOCUSES ON THE DETAILS THAT WILL ASSURE YOU A LOW PRICE. BUT NEVER AT THE EXPENSE OF FUNCTION, STYLING, OR GOOD SENSE. A READY TO ASSEMBLE” ITEM REDUCES TRANSPORTATION AND WAREHOUSING COSTS WHICH HELP YOUR RETAILER KEEP THEIR PRICES REASONABLE. NOW, YOU ARE JOINING “TEAM ADEPTS” WITH THE FINAL STEP, ASSEMBLY.
Dowel 1 2 A These tools are not 8.0 x 30mm supplied by the manufacturer Many People, One Thought B Screw Phillips head 3.0 x 25mm Screwdriver {with or without PROVIDING QUALITY SOULS w Wood irremovable tips) FURNITURE AT AN AFFORDABLE PRICE HAS c 2 " 10 BEEN A GROUP EFFORT. FROM CONCEPT ) TO PRODUCT DESIGN, MANUFACTURING D Drawer 12 Hammer AND RETAILING, BACH AREA FOCUSES OM Runner J THE DETAILS THAT WILL ASSURE YOU (Ea) Caster and 04 Eb) Caster Insert LOW PRICE.
1 PREPARE PARTS FOR ASSEMBLY IMPORTANT Perform the entire assembly ona | | clean, hard surface using the PUSH THE DOWELS (PART A} INTO THE EDGES OF THE FOLLOWING PARTS, AS SHOWN: {PART 2) RIGHT SIDE {PART 3) LEFT SIDE (PART 6) BACK CASTOR SUPPORT {PART 7) FRONT CASTOR SUPPORT flattened box or a towel to protect the surface and the units finish. DO NOT assemble on carpet.
1 PREPARE PARTS FOR ASSEMBLY PUSH THE DOWELS (PART A) INTO THE EDGES OF THE FOLLOWING PARTS, AS SHOWN: (PART 2) RIGHT SIDE (PART 3) LEFT SIDE (PART 8) BACK CASTOR SUPPORT (PART 7) FRONT CASTOR SUPPORT ATTACHING DRAWER RUNNERS: . . THE DRAWER RUNNERS (PART D) WILL STRETCH SLIGHTLY AS YOU HAMMER THEM INTO PLACE. LINE UP THE PIPS IN DRAWER RUNNERS (PART D} TO THE PER-DRILLED HOLES iN THE RIGHT SIDE PANEL (PART 2). EASE THE PIPS INTO THE HOLES BY TAPPING EACH PP DOWN HALF WAY.
4 ATTACH THE BACK PANEL Use all back panels nails. Evenly spaced, they help make the unit strong. + HOLD THE (PART) BACK PANEL IN THE GROOVES in Side THE UNIT'S SIDES, ® ALSO MAKE SURE THE BACK PANEL FITS IN THE GROOVE AT THE BACK OF THE TOP. « CHECK THAT THE UNIT IS SQUARE. » SECURE THE (PART 4) BACK PANEL USING THE (PART) NAILS. F=16 (V Naif 5 ASSEMBLE THE DRAWERS » LINE UP THE BOTTOM EDGE OF THE DRAWER SIDE (PART 8) WITH THE BOTTOM EDGE OF THE DRAWER FRONT {PART 11).
4 ATTACH THE BACK PANEL 6 INSERT DRAWERS AND COMPLETE ASSEMBLY « THE DRAWER SIDES (PART 8) HAVE A CHANNEL THROUGH THE MIDDLE OF THE PART. THIS CHANNEL SLIDES OVER THE DRAWER RUNNERS (PART D). o SLIDE ALL DRAWERS IN. Use all back AND CHECK THE DRAWERS RUN SMOOTH, panels nails. ONE DRAWER FRONT SHOULD NOT OVERLAP ANOTHER Evenly spaced, DRAWER FRONT EDGE. they help make the unit strong. F THERE 1S A PROBLEM, IT IS LIKELY THE DRAWER FRONT IS NOT ASSEMBLED LEVEL.
