Specifications

Mounting the sDIO
Adept SmartController User’s Guide, Rev. H 95
Panel-Mounting the sDIO
To panel-mount the sDIO, install one bracket on each side of the back of the unit. Use the
screws from the accessories kit. See the following figure.
Figure A-3. Panel-Mounting the sDIO
10.0
18.0
346.4
4X M3 x 6 MM
14.0
6.6
16.0
359.6
27.6
273.9
2X 40356-00000
R 3.6
186.5
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com