Specifications

Camera Cable Pin and Signal Information
Adept SmartController User’s Guide, Rev. H 77
Table 4-4. Two-Camera Breakout Cable Pin Assignments
From: Pin To: Pin Function
AVI 8 CAM 1 1 Pow er re tur n
AVI 7 CAM1 2 +12 V power
AVI 12 CAM1 3 Shield (video)
AVI 42 CA M1 4 Vide o
AVI 38 CA M1 5 Shiel d (H d)
AVI 36 CAM1 6 Hd (horizontal drive)
AVI 37 CAM1 7 Vd (vertical drive)
AVI 38 CAM1 8 Shield (Clock)
AVI 22 CA M1 9 Cl ock
-- -- CAM1 10 not connected
-- -- CAM1 11 not connected
AVI 38CAM1 12Shield (Vd)
AVI 6 CAM 2 1 Pow er re tur n
AVI 5 CAM2 2 +12 V power
AVI 43 CAM2 3 Shield (video)
AVI 29 CA M2 4 Vide o
AVI 35 CA M2 5 Shiel d (H d)
AVI 34 CAM2 6 Hd (horizontal drive)
AVI 19 CAM2 7 Vd (vertical drive)
AVI 35 CAM2 8 Shield (Clock)
AVI 20 CA M2 9 Cl ock
-- -- CAM2 10 not connected
-- -- CAM2 11 not connected
AVI 35CAM2 12Shield (Vd)
Note that this cable provides 12 VDC (fused 1 A max) to the cameras
from the Adept controller. The fuse is not user replaceable. If the total
current required by the two cameras exceeds 1 A, this cable should
not be used.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com