Specifications

Camera Cables
Adept SmartController User’s Guide, Rev. H 71
Figure 4-2. Four-Camera Breakout Cable For RS-170 Cameras
10-Meter Camera Extension Cables
The 10-meter camera extension cables have a male Hirose connector on one end and a
female Hirose connector on the other end. These cables go between the breakout cables
and the connectors on the cameras. Each camera requires one of these cables (or an
equivalent). See Table 4-3 on page 76 for the pinout.
ADEPT
CABLE ASSY. CAMERA INTERFACE 4X
CAM 1
CAM 2
1
31
15
44
CAM 3
CAM 4
5
9
1
6
To Camera connector on
SmartController CX
D-sub
Auxiliary
Connector
Pin Signal
1 User +12 V to cameras
2 User power return
3 Strobe 1
4 Strobe return
5 Strobe 2
6 Reserved
7 Reserved
8 Reserved
9 Shield (chassis ground)
D-sub Auxiliary Connector
Pin Assignments
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com