Specifications
Manual Control Pendant Basics
Adept SmartController User’s Guide, Rev. H 131
Programmable Function Buttons
The programmable function buttons are used in custom application programs, and their
functions will vary depending upon the program being run. See the documentation for
your application programs for details on these buttons. Figure C-4 shows the function
buttons.
Data Entry Buttons
The data entry buttons shown in the following figure are used to input data, normally in
response to prompts that appear on the pendant display. The data entry buttons include,
+/YES, –/NO, DEL, the numeric buttons (0-9), the decimal point, and the REC/DONE
button. These buttons are similar to the numeric keypad on a standard keyboard.
REC/DONE Button Behaves like the Return or Enter key on a standard keyboard. When
data entry is complete, pressing REC/DONE sends the entry to the controller. In many
cases, application programs have users press the REC/DONE button to signal that they
have completed a task.
DEL Button Acts like the backspace key on a standard keyboard. When data is being
entered, it will appear on the pendant display. DEL will delete any characters that appear
on the pendant display but have not been entered using the REC/DONE button.
Application programs may also assign special functions to the DEL button.
Figure C-5. Data Entry Buttons
Mode Control and Joint/Axis Control Buttons
The mode control and joint/axis control buttons are used to control the robot from the
pendant. The use of these buttons is covered in “Moving a Robot or Motion Device with
the MCP” on page 140.
Speed Bars and Slow Button
The speed bars and slow button are used primarily to move the robot when it is in Manual
mode. These options are described in “Moving a Robot or Motion Device with the
MCP” on page 140.
In some cases, application programs will make special use of the speed bars. See the
documentation for any application program for details on how it uses these buttons.
F
1
SLOW
T
STEP
1
RZ
6
RY
5
RX
4
REC
DONE
F3
DEV
0 • DEL
123
456
789
YESNO
F
J
7
J
12
–
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com