User`s guide

Chapter 9 - Robot Cleaning/ Environmental Concerns
118 Adept Quattro s650H Robot User’s Guide, Rev A
10. Attach the cable entry top cover, with Roxtec frame and modules, to the AIB cable
seal housing.
• Slide the top cover over the seal housing lip, as shown in the following
figure.
• Ensure that the gasket between the top cover and the cable seal housing is
seated, and that all cables are contained within the top cover.
• Lower the top cover onto the seal housing, and secure with one screw.
Figure 9-12. Installing Cable Entry Top Cover Assembly