User`s guide

Chapter 6: sDIO Module
Rack-Mounting the sDIO Module
To rack-mount the sDIO module in a standard 19-inch equipment rack, you must first install
the mounting brackets on each side of the unit, as shown in the following figure.
NOTE:These brackets must be ordered separately. They do not come with the sDIO
module.
Units are mm
3.6
typ.
6.1
4.2
31.8
16.0
43.9
14.2
2x 40356-00003
R 3.6
190.0
2x M3 x 6 mm
both sides
482.8
462.0
14.0
Figure 6-2. Rack-Mounting the sDIO Module
Adept SmartController EX User’s Guide, Rev. D
Page 60 of 94