User`s guide

Installing Axis Labels
AdeptViper s650/s850 Robot User’s Guide, Rev A 53
5.4 Installing Axis Labels
The system includes a set of axis directional labels that can be installed on the robot. See
Table 5-3. Also refer to Figure 1-1 on page 9 for a drawing of the axis identification. The
yellow X-Y label can be used to indicate the X and Y axes in the World coordinate system
in your workcell.
Table 5-3. Axis Directional Labels
Axis 2
Axis 1
Axis 4
Axis 6
Axis 5
Axis 3