User`s guide

Chapter 5 - System Operation
50 AdeptViper s650/s850 Robot User’s Guide, Rev A
9. Once the calibration is complete, the system will return with a “dot” (.) prompt,
and the status panel display on the sDAI module will read “OK.”
10. System is ready for operation.
5.2 Learning to Program the Robot
To learn how to use and program the robot, go to the V+ Operating System User’s Guide
to find information on basic operation of the V
+
Operating System. Also refer to the
Instructions for Adept Utility Programs for information on using the Adept utility
programs.
For programming information you need to refer to the following list of optional manuals:
• V+ Language User’s Guide
• V+ Language Reference Guide
• V+ Operating System Reference Guide