User`s guide

Pinouts
20 Adept Peripherals User’s Guide, Rev A
4.4 PCIe I/O Card Connections
The I/O card on the SmartVision EX has a single port: a 50-pin, half-pitch D-Sub female
(HPDB50). There are 16 inputs and 16 outputs. The signals are numbered 1001 through 1016 for
the inputs and 1 through 16 for the outputs.
Table 4-4. I/O Card Pin Assignments
Pin Signal Pin Signal
1 VDD Input (fly-wheel diode) 26 VDD Input (fly-wheel diode)
2-4 Common ground or common
power for inputs 1009 - 1016
27 Isolated power output
5 V (Do not use)
28-
29
Common ground or common
power for inputs 1009 - 1016
5 Output 8 30 Output 15
6 Output 7 31 Output 16
7 Output 6 32 Output 13
8 Output 5 33 Output 14
9 Output 4 34 Output 11
10 Output 3 35 Output 12
11 Output 2 36 Output 9
12 Output 1 37 Output 10
13 Input 1004 High 38 Input 1008 High
14 Input 1004 Low 39 Input 1008 Low
15 Input 1003 High 40 Input 1007 High
16 Input 1003 Low 41 Input 1007 Low
17 Input 1002 High 42 Input 1006 High
18 Input 1002 Low 43 Input 1006 Low
19 Input 1001 High 44 Input 1005 High
20 Input 1001 Low 45 Input 1005 Low
21 Input 1012 46 Input 1016
22 Input 1011 47 Input 1015
23 Input 1010 48 Input 1014
24 Input 1009 49 Input 1013
25 Output Gnd 50 Output Gnd
Pin 1 Pin 25
Pin 50Pin 26