User`s guide

Adept Peripherals User’s Guide, Rev A 17
Pinouts 4
This chapter shows pinouts for cables and ports used for connecting Adept peripherals.
4.1 Hirose 12-pin Cable
The Hirose cable is used to provide power for Basler GigE cameras, and to carry latch and strobe
signals for Basler GigE and 1394b cameras.
Table 4-1. Hirose Cable Pin Assignments
Figure 4-1. Back of Basler GigE Camera, with Hirose Pin Numbers
Pin Color Signal Pin Color Signal
1 White Camera Power GND
a
a
Pins 1 and 2 are tied together inside the camera.
7 Violet I/O Output 2
2 Green Camera Power GND 8 Brown Camera Power VCC
b
b
Pins 8 and 9 are tied together inside the camera.
3 Blue I/O Input 1 9 Yellow Camera Power VCC
4 Red I/O Input 2 10 Pink IO Output VCC
5 Gray I/O Input GND 11 Gray/Pink I/O Output 3
6 Black I/O Output 1 12 Red/Blue I/O Output 4
1
2
3
4
5
6
7
8
9
10
1112