Specifications

Chapter 6 - 040 Processor Module
76 Adept MV Controller User’s Guide, Rev C
Connections from 040 RS-232 to Wyse Terminal
Adept recommends the use of a Wyse WY-60 terminal on S-Series Adept MV controllers.
The following connections will work with most terminals using DTE pinouts, such as the
Wyse WY-60 terminal. The WY-60 has a female 25-pin connector. This “3-wire” interface
uses software flow control (XON and XOFF control characters).
6.4 Memory
The 040 system processor can be ordered with either 4 MB or 8 MB of DRAM. It is not
possible to upgrade a 4 MB module to an 8 MB module.
Table 6-3. Pin Assignments for 25-pin to 25-pin (Wyse WY-60 Terminal) Cable
040 RS-232 Wyse Terminal
25-Pin Female
Pin Number Function
25-Pin Male
Pin Number Function
1Shield 1Shield
2RXD 2TXD
3 TXD 3 RXD
7 Signal ground 7 Signal ground
4
5
6
20
(Pins 4, 5, 6, & 20
linked together)
RTS
CTS
DSR
DTR
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com